Troubleshooting Oven Temperature in 2019 Jayco North Point

Question

Question:

I have a new oven in a 2019 Jayco North Point. I turn to knob to 350 and the oven will not heat to 350. I purchased an oven thermostat, it reads 350 with the knob is on 400 and the heat temp will not stabilize within an hour of cooking. Is the knob functioning correctly ?? Please help me to understand the thermostat knob and why 350 is not 350.

asked by: Nell P

1

Helpful Expert Reply:

The Furrion RV Wall Oven with LED Knobs - Gas - Stainless Steel # FSRD22LASS should absolutely function at the correct temperature. It sounds like your oven has a bad thermostat versus a bad knob since you mentioned the temp won't stabilize when you are using a thermometer like # A10-3200VP. If it were just a bad reading on the knob it would still stabilize. I recommend going to the dealer you bought from as that should be covered under your warranty on your new 5th wheel trailer.

They should test the regulator as well to ensure you are getting a constant propane flow as that could alternatively be the issue.

expert reply by: Jason S

1

Mike C.

7/9/2020

Why doesn't the LED thermostat show my temp? Model # fs22n20ass

Reply

Chris R.

7/14/2020

So the digital display on the Furrion Oven is completely blank, or is it just not showing the correct temperature that you've set using the control knob?

Reply

Kathleen K.

9/19/2020

@ChrisR My oven has this problem also. Only the digital timer shows up on the LED display, not the temperature. How do I know when the temperature has been reached?

Reply

Jon G.

9/21/2020

@KathleenK I reached out to my contact at Furrion and she said that this unit is no longer built to display the temperature - just the timer. She said that once the desired temperature has been reached you will hear a chime.

Reply

Answer 1

Hello Rachael, The propane model #FSRD22LASS cannot be used without the electric because it is needed to spark the ignitor, but I have a different solution. You are not the first person to bring up the annoying lights on the oven, the JR Products…

view full answer...

Answer 2

Hey John, yes you could use a 120 volt to 12 volt converter to allow you to use the GE Profile Propane RV Range part #GE37VR with a 12 volt power source. Do you have a converter already?

view full answer...

Answer 3

If your Furrion Propane RV Built-in Wall Oven #FSRD22LASS is having problems lighting or staying lit then there are a few things that you can check. The first being that you gas bottles are full and that all valves are fully open. A manometer can be…

view full answer...

Answer 4

Hello Merle, thanks for reaching out. So we do have an air bag kit that will fit your2024 Ford F250 with the onboard scales, and for that I recommend the Firestone Ride Rite #F35FV. Keep in mind though that the onboard scale basically works by…

view full answer...

Answer 5

I spoke to Furrion about your RV Wall Oven #FSRD22LASS and they informed me that there is no replacement thermocouple. I was instructed that if your pilot light will not stay lit that you would have to replace the entire oven as there are no…

view full answer...

Answer 6

We do indeed have a replacement for the 524276 power gear motor, but it is a different part number than what you mentioned. The correct replacement motor will be the Lippert #LC368193.

view full answer...

Answer 7

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Troubleshooting Oven Temperature in 2019 Jayco North Point

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching