Replacement Brake Assembly Recommendation for Brake Drum that Measures 7.25 by 1.25 inch
Updated 03/25/2019 | Published 03/22/2019
Products Featured in This Question
Question:
Looking at replacing brakes on my pop up. When I measure the inside of hub/drum I get about 7.25 and measuring the brakes pads I get 1.25. Im assuming the etrailer 7in elec brakes will work. I know my bearings are l44649 for both.
asked by: Ashley R
0
Expert Reply:
Yes, the Electric Trailer Brake Kit # AKEBRK-2 that you referenced are the brake assemblies you'd need. These are the correct size at 7 inch diameter by 1-1/4 inch wide.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Brake and Hub Compatibility for a 2,000-lb Trailer Axle with L44643 Bearings
- Article: Trailer Wiring Diagrams
- Q&A: Replacement 7 inch Brake Assembly for Fiat Elnagh 320 Motorhome
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Adding Electric Drum Brakes to a Scamp Camper Trailer
- Q&A: Can Brake Drum Be Added To etrailer e37YR 2K Axle With Idler Hubs?
- Q&A: Is 2013 BMW X5 With Factory 7-Way Set Up for Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does Brake Output Wire on USCAR Harness Need To Be Hooked Up To Use Redarc Tow-Pro Link?
- Q&A: What Size Brake Assemblies Will Fit with 12 inch Diameter Wheels
- Article: Troubleshooting Brake Controller Installations
- Article: Brake Controller Installation: Starting from Scratch
- Article: Curt Echo Full Review
- Article: How to Tell the Weight Rating of a Trailer Axle