Replacement Lock Nut for Blue Ox Hitch Receiver Immobilizer

Question

Question:

BX88225 parts - Do you have replacement U bolts for the blue ox immobilizer? Blue ox part number is 201-0795 U bolt and 202-0071 lock nuts. thanks,

asked by: James M

0

Expert Reply:

We do carry one of the parts you mentioned, the Replacement Hex Whiz Lock Nut for Blue Ox Hitch Receiver Immobilizer # BX202-0071.

expert reply by: Kyle S

0

Answer 1

I just heard back from Demco and their 12" Long Safety Cable Extensions item #DM9523064 are 1/4" in diameter.

view full answer...

Answer 2

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV (discontinued) - Demco Tabless Base Plate Kit #DM77YV Both will fit your…

view full answer...

Answer 3

Yes, anytime you extend the connection point of a tow bar like the Blue Ox Avail part #BX7420 with a high-low adapter or dual hitch adapter you will need to extend the safety cables. For this, I recommend the Demco Safety Cable Extensions part…

view full answer...

Answer 4

The Quick Links included in the Tow Ready Safety Chain #TR63035 are rated along with the chain itself for 5000-lbs break strength. The working load limit (WLL) is 1650-lbs. I verified this with my contact at TowReady. We do offer Quick Link…

view full answer...

Answer 5

The Curt Threaded Quick Link, 1/2" #C82932 have the 16,500 lbs break strength and 3,300 lbs working load limit but are not available in stainless steel. They are zinc coated to prevent corrosion. The Quick Link I recommend is the Blue Ox…

view full answer...

Answer 6

Hey Rick, yes you can just swap out the shank that you have now for one that is designed for a 2-1/2 inch hitch like the Blue Ox part #BXW4028. You probably already know this but you'll most likely need different spring bar tension on the new…

view full answer...

Answer 7

Hey Jason, thanks for reaching out! Your 2022 Grand Design Transcend Xplor 265BH either has 3,500 lb axles or 4,400 lb axles. Both are listed out on the Grand Design website so you'll just need to check out the tags in the middle of your axles to…

view full answer...

Answer 8

Hey Steve, yes a Rock Tamers mud flap kit like the part #RT47VR would work with the Weigh Safe adjustable ball mounts part #WS68RR and #WS56ZR. The ball mounts have enough clearance on the shank to allow the Rock Tamers to fit.

view full answer...

Answer 9

Hey, Kenny! The gasket included in the Steel Rubber RV air conditioner rubber gasket kit, part #SR73MR, is 1" tall and 1-1/2" wide. It’s designed to fit the standard 14" x 14" AC opening. Below, you’ll see a picture showing all of…

view full answer...

Answer 10

Hey Phillip. The mounting bracket item #18144 is exactly what you need for the Blue Ox Trailer Hitch item #BLU33UR. This 2" hitch is custom fit for the 2020 Jeep Wrangler Unlimited. The mounting bracket will bolt directly to it. For a wiring…

view full answer...

Answer 11

We do offer hitch extensions in various lengths to fit 2-inch and 2-1/2-inch truck hitches. These are shown on the linked page. The issue with hitch extensions is that they typically cause a loss of hitch capacity, a 50-percent loss! This happens due…

view full answer...

Answer 12

Jacob, the only difference is the range. The #WS52ER gives you up to 6 inch of drop, while the #WS97WR goes to 8. Both are built on a 2.5 inch shank, both are rated 22K GTW / 2,200 lbs tongue weight, and both include the pintle plus 2 inch and 2-5/16…

view full answer...

Replacement Lock Nut for Blue Ox Hitch Receiver Immobilizer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching