Parts Needed to Flat Tow 2005 Mini Cooper Behind Motorhome  

Question:

Expert Reply:

Thanks!! First thing you need to flat tow your 2005 Mini Cooper is a base plate kit. for that you'll want the Blue Ox part # BX1303 which is a custom fit for your vehicle. I attached an install video for this kit on a similar 2005 Cooper as yours for you to check out.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. For a tow bar the Blue Ox # BX7420 is a great option. It has telescoping arms which allows you to easily connect/disconnect and comes with safety cables.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by: Jameson C

0