Dimensions of the 12" Blue Ox Hitch Extender

Question

Question:

What is the depth of the receiver tube from the opening end to the centerline of the pin hole and the total depth of the receiver tube?

asked by: Peter P

0

Expert Reply:

From the opening of the Blue Ox Hitch Extender # BX88264 to the center of the hitch pin hole measures 2-1/2". Then from the opening of the receiver to the start of the weld, which is about where the tube depth stops, measures 12-1/8". The total length, or depth, of the extender is 18-1/8".

I have attached a photo with these dimensions for you to check out as well.

expert reply by: Jon G

0

click to enlarge

Thank J.

3/6/2026

I can't find exact dimensions of other receiver extensions. This is perfect.

Answer 1

I have a solution for you- the Blue Ox Hitch Extender for Tow Bars #BX88264 which has a 1000-lb tongue weight / 10000-lb towing weight capacity and will also provide a 12" extension for your hitch. This is the only hitch extender we currently…

view full answer...

Answer 2

David, instead of a hitch extender, which will cut your capacity in half and add another possible point of failure, I recommend using a longer shank. You'll want to check out the Equal-i-zer Weight Dist Shank #EQ90-02-4600 which measures 18"…

view full answer...

Answer 3

I have a solution for you, however, the Blue Ox Hitch Extender #BX88264 is is designed for hitch-mounted accessories or for flat towing only, not to tow a trailer. Your best option is to use an extra long weight distribution shank, like the Curt…

view full answer...

Answer 4

Hey Terry, the Blue Ox Avail BX7421 our part number #BLU28QV is the current version of the Avail whereas the 7420 was the initial version. Only real difference is the finish. The 7421 has a newer finish that's a bit more durable but other than…

view full answer...

Answer 5

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 6

Hi Chris, if you respond to the email with the link for this page you can attach your pictures and send them to me.

view full answer...

Answer 7

Hey Jeff, welcome back! The Equal-i-zer Weight Dist Shank item #FA88FR has the standard 1-1/4" bolt hole spacing. The holes are 3/4" in diameter. This shank is compatible with almost every weight distribution system on the market with the…

view full answer...

Answer 8

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 9

Hello Brent, thanks for reaching out. Yes! The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers #325-GH-224 can absolutely be used for flat towing. You can put the tow bar in the lowermost receiver, then put your bike rack in the uppermost…

view full answer...

Answer 10

I recommend going with Blue Ox Hitch Extender for Tow Bars #BX88264. This extender fits 2" hitches, has a 12" extension and a towing capacity of 10,000 pounds. I spoke with my contact at Blue Ox and she confirmed that extender #BX88264 can…

view full answer...

Answer 11

The swing away extenders are for the use of bike racks and cargo carriers only. They're not meant for towing use. You will need to use an extender like The Draw-Tite Hitch Extender #HE18 this can be used on any standard 2 inch receiver, or you…

view full answer...

Dimensions of the 12" Blue Ox Hitch Extender

Product Page this Question was Asked From

Continue Researching