Continental Cargo Trailer Roof Vent Lid Recommendation

Question

Question:

I have a 2010 Continental Cargo trailer. The roof vent is Eline and the number on the cover is V00434. It measures 14x14 inside measure. Do you have a cover for this vent. Thank you.

asked by: C. D

0

Expert Reply:

Based on the number and picture you gave me I was able to determine that you have a Ventadome style roof vent from Ventline so the correct replacement lid is the part # BVD0449-A01.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Replacement Lens part #A68RB that you referenced measures 3-1/2 inches long by 1-1/8 inches tall. If the lens you are looking to replace matches these dimensions then this would work for you. The part number for the light this lens is designed…

view full answer...

Answer 2

The Furrion Standard RV Microwave, #FMSN09BL has actual measurements of 19-1/16" wide x 13-5/8" tall x 14-1/16" and requires minimum cut-out dimensions of 20-1/4" wide x 13-7/8" tall x 14-5/8" deep. From an online search…

view full answer...

Answer 3

To determine which replacement lid you need you will need to check the hinge on the roof of your vent lid. I have included an chart that has the most common lids and shows the hinges. Once you identify the hinge you will need one of the following…

view full answer...

Answer 4

To determine which cover you need, examine the existing vent cover (or what is left of it) for a manufacturer name or model number. Take a look at the replacement covers we offer (see provided link) paying close attention to the thumbnail photos…

view full answer...

Answer 5

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly…

view full answer...

Answer 6

I called and spoke with Forest River, maker of the Continental Cargo trailers. She stated that they use Elixir vents. So that information really helps narrow down the possible options for replacement vent lids. Since you have a trailer made after…

view full answer...

Answer 7

The correct replacements we offer for the Glo Brite Marker Lights 118A and 117R is the Trailer Clearance or Side Marker Light part #MC44AB for amber and part #MC44RB for red.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Continental Cargo Trailer Roof Vent Lid Recommendation

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching