View Cart

How to Install the Prodigy RF Brake Controller on a 2015 Jeep Wrangler with Factory 4-Way Connector

Question:

Is there a video showing how to install this on a 2015 jeep wrangler willys edition with a factory 4pin already on the jeep

0

Expert Reply:

We currently (February of 2019) don't have an installation video of the Prodigy RF # 90250 on a 2015 Jeep Wrangler but the installation will be the exact same as the other vehicles that we have videos on. This is because the RF installs on the trailer and just requires a 7-Way with the basic trailer lighting functions and 12V power to operate.

Since you currently have a 4-Way on your Wrangler you simply need to install the 7-Way RV Upgrade Kit # ETBC7L and you can use the RF! This plugs into the factory 4-Way on your Wrangler and then just needs the included power wire routed to your battery (through the included circuit breaker) so that you have power to the RF.

I have attached an installation video of the Universal Installation Kit # ETBC7 on a 2013 Wrangler Unlimited for you to reference. The only difference between the ETBC7 and the ETBC7L is that the ETBC7 has some extra components so that you have a fully functional 7-Way. A no-drill mount bracket like part # 18136 is useful in the event that you don't have an easy way to secure the new 7-Way bracket.

Once you've installed the 7-Way on your Wrangler just follow the attached review video for the Prodigy RF and you are good to go!

expert reply by:
0
Jon G

Ask The Experts a Question >>


Products Referenced in This Question




Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>