How to Raise the Height of a 5th Wheel Trailer Without Flipping the Axles
Published 02/05/2019 >
Products Featured in This Question
Question:
I think I will order the flip kit Thank you
asked by: Tim H
Helpful Expert Reply:
To gain height without flipping your axles I recommend doing 2 things: replacing your leaf springs with ones that have more leafs and changing out your hangers for taller ones. You can probably get away with just swapping out your hangers but unless you only have something like 2 or 3 leaf springs and you want to gain height you would have to go with at least 4 or 5 leafs to gain enough height.
When replacing leaf springs be sure to choose new ones that have a weight rating that matches you axle, has the same width, and has close to the same length. Sometimes leaf springs can stretch a bit over time so if your old ones are slightly longer the new ones will still work.
For example, the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles # e54SR is for a 3,500 lb axle, has a width of 1-3/4", and has a total length of 25-1/8" from center eye to center eye.
To replace your hangers you will have to have a welder come out and cut off your old hangers and then weld on the new ones.
Attached is a leaf spring installation video as well as links to our selection of leaf springs, hangers, and helpful articles on trailer suspension for you to reference.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bumper
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Search Results: axle flip kit
- Search Results: trailer leaf springs
- Video: Hands-On with the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Westin HDX Bandit Rear Off-Road Bumper - Black
- Search Results: bump stops
- Shop: Curt Rota-Flex 5th Wheel Pin Box - Lippert 1621 - 21,000 lbs
- Shop: Curt Rota-Flex 5th Wheel Pin Box - Lippert 1116 - 19,000 lbs
- Shop: Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
- Article: How to Raise Your Travel Trailer Height
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Replacement Suspension Parts & Lift For 2012 Skyline Koala 27CDS With 3,500 lb Axles
- Video: Complete Breakdown of the Torflex Lift Kit
- Q&A: Recommended Lift Kit for 2012 Keystone Cougar XLite Fifth Wheel
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Why Can't Correct Track Lift Kit be Used with MORryde CRE3000
- Q&A: How to Raise 5th Wheel Trailer Height to Level Trailer with Taller Truck
- Q&A: Will Nose-High 5th Wheel Trailer Sway During Travel
- Q&A: Trailer Leaf Springs Upside Down?
- Article: Slipper Spring Trailer Suspension System Review
- Search Results: never fail bushings
- Search Results: spring bushings
- Search Results: leaf spring bushings
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR55QX
- Video: Firestone Ride-Rite Red Label Air Helper Springs Installation - 2019 Chevrolet Silverado 3500





Tim H.
2/5/2019
I think I will order the flip kit Thank you