Hanger Kit Recommendation for Slipper Leaf Spring # e33SR
Updated 01/03/2019 | Published 01/01/2019
Products Featured in This Question
Question:
Im replacing springs on ez loader trailer with Item # e33SR. I have a 2inch square axle and the bra keys are already in place. I need to know which bolts for the eye and what bolt for the rear bracket. I also need to know which ubolts and plates for connecting the spring to the axle. Thank you.
asked by: John
Expert Reply:
Sounds like what you are in need of is a single axle hanger kit for the leaf spring part # e33SR that you mentioned. For that you'd only need the # APS3SE and you'd be set. This gives you the hangers for the front and rear for the spring as well as the correct nut and bolt to hold it all.
For a u-bolt kit you'd then want the part # CE23103 for the axles.
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Marine Grade
- etrailer
more information >
Continue Researching
- Article: Where to Position the Trailer Axle?
- Search Results: standard equalizer trailer suspension parts
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Q&A: Does the Open End Of The Slipper Spring Require a Bushing?
- Q&A: Do You Have The Replacement Open Eye Leaf Springs and Hardware For a 2001 Load Rite Boat Trailer
- Q&A: Is It Normal For Open Eye Spring To Hit Frame Of Trailer When Loaded?
- Q&A: Karavan Tandem Boat Trailer Slipper Spring Replacement, is Bushing On Hook End Required
- Q&A: Correct Bushing and Bolt for 4-Leaf Slipper Spring # e33SR
- Q&A: Should a Nylon Bushing Be Used With the Open Eye End Of Slipper Spring # e33SR
- Shop: 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long
- Shop: Replacement Bolts for Equal-i-zer Weight Distribution Head - 4,000 lbs GTW
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: Step Wet Bolt for 1-3/4" Double Eye Springs
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Angle Of Shackles On Trailer Appear Wrong When Installing Leaf Springs
- Search Results: timbren trailer axles
- Search Results: timbren hd
- Search Results: trailer leaf springs
- Search Results: slipper spring hanger
- Video: Comprehensive Review: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles
- Video: In-Depth Review of the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Video: Hands-On with the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Video: An In-Depth Look at the Dexter 4-Leaf Slipper Spring w/ Hook End for 2,500 lb Trailer Axles
- Video: Ultimate Overview of the Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs
- Video: The Low-Down on the Aluminum AM03 Series Gunmetal Gray Machined Trailer Wheel
- Search Results: wheel studs
- Search Results: lug studs