Will the Gen-Y Anti-Rattle Work with Weigh Safe Ball Mount?

Question

Question:

Will this work with a Weigh Safe WS8-25? The shank has very little room from the end of the receiver to the bend in the hitch.

asked by: Gary L

0

Expert Reply:

The Gen-Y Anti-Rattle Clamp for 2-1/2" Hitch Receivers # 325-GH-063 will work well as long as you have the between 7/8 inch and 1/2 inch between the receiver collar and the drop shank. The Anti-Rattle will wedge between the mount and the receiver for a snug fit.

The Weigh Safe 2-Ball Mount w/ Built-In Scale - 2-1/2" Hitch - 8" Drop, 9" Rise # WS8-25 has enough room on most applications for this even though the shank is close as you stated with certain hitch receivers.

I've attached a photo to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 4

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 5

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 6

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 7

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

Hi Don, Based off the measurements of your current equalizer being 5 5/8" center to center, I wouldn't recommend using the MORryde CRE3000 because it's over an inch longer than your current equalizer. Having an equalizer that's…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Will the Gen-Y Anti-Rattle Work with Weigh Safe Ball Mount?

Featured Help Information

Miscellaneous Media

Continue Researching