Hub Dimensions To Determine Compatibility with John Deere Garden Tractor Use
Published 11/30/2018
Question:
can you tell me the length, or total height, of spindle AK1HUB-440-2-1K. Im wanting to replace the hubs on my john deere garden tractor with 1 inch spindles, but Im thinking these spindles are too long. Thanks
asked by: Mike S
1
Helpful Expert Reply:
The Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 # AKIHUB-440-2-1K will use the 1 inch spindle and measures 4-1/4 inches wide. I've attached a photo to assist. We don't have the compatible spindles to give you an accurate measurement.
expert reply by:
Jason S
1
click to enlarge
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub for a Malone LowBed MicroSport Trailer MAL25FR
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: How To Read Age of Tire From DOT Number Printed on Tire Sidewall
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Can Trailer Hubs Be Shimmed to Adjust Camber
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: How to Replace or Install an RV Roof Vent
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub