Replacement Bearing and Hub Kit Recommendation for Aluma 5310
Published 11/21/2018
Products Featured in This Question
Question:
I am trying to find the correct bearing and or hub kit for a Aluma 5310 trailer. Aluma was no help. 2000 lb axle 5 X 10 utility trailer. 1 1/16 on both inner and outer can you confirm that? Thank you,
asked by: Brad N
Expert Reply:
Your bearings having an inner diameter of 1-1/16 inch indicates you have a standard size spindle. The size matches the BTR spindle. The bearings part # L44649 that you referenced match what you'd need. For a hub that will fit this we have the part # 8-91-05UC1 for an idler hub with a 4 on 4 inch bolt pattern. Then if you need a 5 on 4-1/2 inch bolt pattern instead you'd want the part # 8-259-5UC1-EZ.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Q&A: Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Looking For ID 1.250" / OD 1.979" Double Lip Grease Seals For Jet Ski Trailer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Idler Hub for a Dexter 3,500 lbs Axle
- Q&A: Is Furrion Vision S+ Direct Replacement for Vision S
- Article: Electric Trailer Brakes: How They Work & What to Buy