Where is Drop Measured From for Trailer Axle With Drop Spindle?
Updated 09/24/2018 | Published 09/22/2018 >
Question:
spindles for part # 8327812-EB From what points do you measure to get 4inch or 5inch . Thanks,
asked by: Dewayne
1
Helpful Expert Reply:
The Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube # 8327812-EB has spindles that drop 4 inches from the center of the trailer axle beam.
What this means is that you get an additional 4 inches of clearance from the center of the beam to the spindle.
expert reply by:
Kyle S
1
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" - 3.5K
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Continue Researching
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Q&A: Which Direction Should Leaf Springs Be Installed on a Trailer
- Q&A: Are Bearings Already Installed On TruRyde Trailer Hub and Drum Assembly
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Comparing Dexter And etrailer Brand 6,000 lb Axles
- Q&A: Can Brake Parts be Replaced on Dexter 2,800 Pound Axles with Weld-On Trailer Brake Assemblies
- Q&A: Solution for Needing Replacing Pump of Lippert Pump Assembly 646822
- Article: Trailer Maintenance Schedule
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch

