Transmission Filter Extender for a Pan Transmission Cooler for a 1999 Dodge Dakota with 5.9 Liter
Updated 10/11/2011 | Published 10/10/2011 >
Products Featured in This Question
Question:
Is the filter adapter required to be used with the Dodge trans pan cooler? Would the pan cooler be more or less effective than one of the universal fit models understanding that the effectiveness of the cooler will depend on its size? Is there a drawback to combining a pan cooler with one of the universal fit coolers? I have a 1999 Dodge Dakota R/T with the 5.9L. Thanks!
asked by: Everett B
Expert Reply:
It is strongly recommended to use the Filter Extender, # D14010, when you add a Pan Cooler type of transmission cooler like # D14210. It is not required to install the cooler or allow it to work though. but you would not want to get caught in a situation later where it becomes a hindrance not having one. Please note that this cooler is made for vehicles with an A518 (46RH or 46RE), A618 (47RH, 47RH, or 48RE), or A727 (36RH or 37RH) transmission.
Transmission fluid cannot be overcooled so you could use an additional transmission cooler if you wanted to. It will take longer for the transmission to warm up in cold weather with greater cooling capacity. You would not really need a large one if you also install the pan cooler so # D13502 and fitting # D13030 would be a good choice. I have included links to our FAQ article on transmission cooler and a video showing a typical application.
Product Page this Question was Asked From
Derale Transmission Pan Cooler for Dodge A518, A618 and A727
- Transmission Coolers
- Pan-Cooler
- Below the Vehicle Mount
- 4-1/2D Inch
- With 1/8 NPT
- Derale
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Is Drilling Required to Install etrailer Trailer Hitch # e53AR on a 1995 Dodge Dakota
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4
- Q&A: Are Pacbrake Alpha HD Air Bags Compatible With Turnoverball On 2024 Ford F-250
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Q&A: Outer Dimensions of JR Products Double Rocker Switch
- Article: Brake Controller Installation: Starting from Scratch



