Torque Spec for Lug Nuts on Trailer Hub # T4084600042
Published 08/27/2018
Question:
I can not find the Torque spec for lug nuts on Trailer Hub # T4084600042
asked by: Diego C
1
Helpful Expert Reply:
Lug nut torque is determined by a few factors. The size of the wheel, the metal the wheel is made from, the diameter of the studs etc. If you check out the chart I attached you'll see how to determine how much torque to use when installing a wheel on the Trailer Hub part # T4084600042.
expert reply by:
Jameson C
1
click to enlarge
Product Page this Question was Asked From
Dexter Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast Iron
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Correct Bearing Kit for a 2001 Karavan Single Axle Jetski Trailer
- Q&A: Mounting a Marker Light at a 45 Degree Angle at the Back of a Trailer
- Q&A: Recommended 5 Lug Hub for a Spindle w/ 141125 Inner and 09067 Outer Bearings
- Q&A: What Tire Size Replaces an Old A78-13 Tire Size
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: How to Identify Correct Replacement Hub Based on Bearing Part Number or Spindle Dimensions
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub