Trailer Brake Controller Fuse Location on 2014 Ram 2500

Question

Question:

All my other lights work but I have no trailer brakes. Which relay controls the trailer brakes in my 2014 ram 2500 6.7 cummins?

asked by: Kyle M

0

Expert Reply:

I took a look at the online version of your 2014 Ram 2500 owner's manual. It looks like there should be a 30 amp pink fuse located in the F11 position inside the power distribution box (under the hood). This particular fuse is for the integrated trailer brake module on the truck. Make sure this fuse is present and in good condition.

If the fuse is good or replacing it doesn't resolve the issue, please let me know and we can continue to troubleshoot.

expert reply by: Chris R

0

John S.

1/14/2020

I have the same problem and that 30 amp fuse is not blown! Have you ever come across any other problems? I have checked it with one of those plugs with the Leds and the brakes don’t work and it doesn’t appear to have a trailer connected to it on the dash

Jason S.

1/17/2020

For your trailer wiring to work, some "smart" vehicles require seeing the trailer connection. That trailer connection on the dash is often connected to seeing a power draw at the trailer brake output. It is a slight draw that even connecting a non LED circuit tester like # 40376 will cause enough draw to sense. LED testers simply don't pull enough power for that connection to be seen. This will help you check that 5 o'clock pin (brake controller output) in your 7 way to determine if there is an issue on the truck side or if the issue is on the trailer side. Note that even corrosion in the trailer connectors can cause an issue with that function and a little sand paper can solve it. If it is on the trailer side, you will want to check all your wiring for any missing insulation or corrosion. You will also want to check each ground wire to make sure it has a metal to metal connection free of corrosion or debris.

Helpful Links

faq-wiring-7-way.aspx

Thomas B.

8/23/2025

I have a 2021 ram 1505.7 hemi. I installed a brake controller and it does not appear to be connecting to the brakes on my Lance 2017 model 2375. what fuse number is the brake control controller associated to on a 2021 ram 1500.

Chris R.

8/25/2025

@ThomasB Hey Thomas. On your '21 Ram 1500 you want to look for the 40 amp green fuse inside the internal power center, which is located under the driver's side instrument panel.

Thomas B.

8/25/2025

@ChrisR Chris, how would I know which is the correct location for the the green 40 amp fuse? I took a picture, but I can’t upload it here

Answer 1

Hey Guy, While I can't answer that directly as I don't know what axles you have, I can tell you how to figure out if the right kit for you is the DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers #DE66AR. What it comes down to is…

view full answer...

Answer 2

Hey Michael, Thanks for the serial number of your axle, it made it possible to find the bearings and seal numbers so I could verify what would fit. If you want the best you'll definitely want to go with a DeeMaxx kit like the #DE66AR. This kit…

view full answer...

Answer 3

Hi Ron; the DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers #DE66AR is the correct kit to convert to disc brakes on your 2015 Grand Design Solitude 369RL. It includes the brakes, EOH actuator, and hydraulic lines. The only other thing you…

view full answer...

Answer 4

On your 2018 Montana 3791 RD, with Dexter 7K axles, we do have the parts but not in a kit for axles that large. I recommend the Kodiak Disc Brake Kit - 13" Hub/Rotor - 7,000 lbs #K2HR712D along with Bearing Kit #BK3-100. I recommend using grease…

view full answer...

Answer 5

Hi Kevin; the answer to your question is yes. The DeeMaxx Disc Brake Kit w/ Actuator #DE66AR will work with your 2024 Ram factory brake controller.

view full answer...

Answer 6

Hey Wade! Your picture didn't come through so I wasn't able to see what axles you have on your 2019 Keystone Alpine 3700FL. Do your axle tags say they're 7,000 lbs? If so, you can use the DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle…

view full answer...

Answer 7

Hi Kendal, There unfortunately is a guide available to us to see what bearings and seals fit your trailer's spindle so you'll need to remove one of the hubs and look for their part numbers. If you don't want to trash the grease seal to…

view full answer...

Answer 8

The blue electric brake power feed wire should be connected to the terminal in a 7-Way RV style connector, at the 7 o-clock position when looking at the inside of the connector. If looking at the outside of the connector the terminal is in the 5…

view full answer...

Answer 9

Hello Jeney, thanks for reaching out. There could be a few reasons why your Fireplace is not staying on. The first being that there isn't enough power running to the unit for it to properly operate. You'll want to use a multimeter #PT89ZR on…

view full answer...

Answer 10

Since the heater you have now is a 26-inch-wide fireplace with a curved front our best replacement option is the Greystone part #324-000068 as this is the correct size but is not curved.

view full answer...

Answer 11

The only difference between the Greystone 26" Electric Fireplace #324-000068 and #324-000069, which is no longer active is that their overall dimensions are slightly different. The Greystone #324-000068 has overall dimensions of 28-3/8"…

view full answer...

Answer 12

Thank you for the pictures. You are definitely on the right track here. The Tekonsha #118747 is not intended for the models with the premium package. I will have customer service contact you for a return. I do not recommend cutting the plugs off of…

view full answer...

Trailer Brake Controller Fuse Location on 2014 Ram 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching