bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. RV Steps Help Hub
  4. RV Steps Q&As
  5. Question 315431
Q & A Icon

Availability of Replacement Single Step with Mounting Frame Brackets 22 Wide  

Published 08/23/2018



Question:

i am replacing my damaged power step with a manual single step. The bolt holes one the frame are 22. I am having trouble finding the correct replacement.

0

Expert Reply:

The closest we have to a 22" mounting bracket spacing is the Flexco Manual Pull-Out Step # SMFP-1120 which has mounting bracket that are 21-1/16" wide. If this doesn't fit (which it sounds like it won't) then I recommend going with the Flexco Manual Pull-Out Step # SMFP-1200 and using the Outriggers # LC301704 to replace your current mounting brackets. These will enable you to get the desired mounting bracket distance.

expert reply by:
0
Jon G
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on RV Steps

Videos

Help Articles

Expert Answers

Others Also Watched
Breaking Down the NOCO AC Port Plug with Dual Extension Cords
NOCO Accessories AC Port Plug with Extension Cord Installation - Enclosed Trailer
Ultimate Overview of the etrailer Enclosed Trailer Transition Plate
Lippert Outriggers for Manual RV Steps Spec Review
Feature Breakdown: Flexco Manual Pull-Out Step for RVs
Diamond LED T8 Light Strip with Wiring Harness Installation - Enclosed Trailer
Others Also Read
Trailer Wiring Diagrams
Trailer Lighting Requirements
30-Amp and 50-Amp RV Service: What's the Difference?
What are the Common Types of Propane Fittings Used on RVs?
How to Measure for Motorhome Steps
Roadmaster Tow Bar Feature Descriptions
Roadmaster Vehicle Specific Base Plates
Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
How to Measure for Travel Trailer and Fifth Wheel Steps
Determining Trailer Tongue Weight
Trailer Hitch Receiver Sizes
Others Also Asked
Can Storage Boxes be Mounted on Front of V-Nose Trailer

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

view full answer...
Recommended Manual Step for a 2022 Travel Lite Rove Lite 14FD Camper

Hey Michele! To add a manual step to your 2022 Travel Lite Rove Lite 14FD camper, I recommend the Lippert Manual Pull-Out Step for RVs item #LC432678 and the Lippert Outriggers for Manual RV Steps item #LC301704. The Manual Pull-Out Step item…

view full answer...
Installation of Flexco Manual Steps When Mounting Hole Dimensions Dont Line Up With Previous Steps

The Flexco Manual Pull-Out Step for RVs like #SMFP-1120 and most other brands as well use outriggers like #LC301704 to mount when the mounting holes of the original steps are not a perfect match. The outriggers are able to be mounted wherever needed…

view full answer...
Recommended Replacement For A Jensen JRV210 RV Stereo System In A 2011 Thor Serrano Motorhome

The JRV210 RV stereo system requires a cutout hole 7-1/4" x 4-3/8" and the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth, jControl - 12V #JWM60A requires a 9" wide x 6" tall x 5-1/2" deep cutout hole so you would need to…

view full answer...
Availability of Stainless Steel Trailer Side-Door Bar Lock Assembly

The Polar 55-Inch Side-Door Bar Lock Assembly #3057-55 features galvanized steel construction but they do offer a universal kit with stainless steel components, part #PLR158-SS. This kit does NOT include the 3/4-inch diameter pipe so that one part…

view full answer...
Installation and Mounting for the Demco Hydraulic Brake Actuator

I looked on Demco's website and was able to pull some information and diagrams on how you would mount the Demco Hydraulic Brake Actuator item #DM8609101. I have attached them below. I was not able to find any pictures of this Actuator installed.…

view full answer...
Depth of Flexco Manual Pull-Out Step Single SMFP-1120

The stored depth of this step from the center of the front mounting hole to the back of the slide bracket measures 11 inches. The height of the step will be 7 inches when it is stored. I have attached diagrams showing these measurements. To make sure…

view full answer...
Mounting Bolt Hole Pattern for Lippert Manual Pull-Out Step for RVs

Hey Kathy, thanks for reaching out! Yes, the mounting bolt hole pattern for the Lippert Manual Pull-Out Step for RVs #LC432678 is 4" for depth and 24" for width (see attached photo and review video).

view full answer...