Parts Needed to Flat Tow 2016 Jeep Wrangler Sport  

Question:

Expert Reply:

First thing you need for your 2016 Jeep Wrangler Sport is a base plate kit confirmed to fit it. For that we have the Demco base plate kit part # DM9519292 which would fit and work well. I attached an install video for this for you to check out as well. The tow bar part # DM9511012 will fit and work well too. It installs by connecting directly to the trailer hitch and includes safety cables.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest systems to set up and use are portable systems like the Blue Ox Patriot # BLU37TR. It applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles. You will also need the # RM-9332 for installation.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by: Jameson C

0