Recommended Equalizer WDH for Rockwood Roo 23FL with 750 lb Tongue Weight

Updated 08/21/2018 | Published 08/20/2018

Products Featured in This Question

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW

(861)

$647.66

1-7/8" 12pt Shallow Socket - 3/4" Drive - Chromium-Vanadium Steel

(290)

$19.44

Question:

What version of the Equalizer WDH would you recommend? Specs: Rockwood Roo 23FL 2019 Dry Weight 5,617 lbs. Payload Capacity 1,133 lbs. Tongue Weight 750 lbs. Length 29.58 ft. Tow Vehicle: 2006 GMC 2500HD Sierra Crew Cab Short Bed and 4WD Thanks!

asked by: Scot M

Expert Reply:

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.

Lets say you have 750 lb of tongue weight when you are loaded the Equal-i-Zer system part # EQ37100ET that you referenced would fit and work well. It has a tongue weight range of 600 to 1,000 lbs tongue weight. Only other thing you'll need is a thin-walled socket to install the hitch ball. For that you'd need the part # ALL643216 and you'd be set.

expert reply by: Jameson C