Replacement Scissor Jack for a 2017 Rpod 179 Hood River Edition

Updated 08/15/2018 | Published 08/14/2018

Products Featured in This Question

Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2

(483)

$130.63

Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1

(801)

$58.72

Question:

I have an early 2017 R Pod, model 179, Hood River edition. I trashed one of my stabilizer scissor jacks. I can’t find a part number anywhere that lets me know what jack to order for a replacement. Do you know which jack my rig takes? Is there one you would recommend? Current ones are 24” long...not sure of capacity. Brackets are both bolted and spot welded to frame. Screw holes are 2 ½ apart on center. Thanks for any help.

asked by: Emily A

Helpful Expert Reply:

While I do not know which specific jack make and model came on your Rpod originally you can install pretty much any other similar jack, such as Ram Scissor Stabilizer Jack # TJSC-24, as a replacement. The mounting holes likely will not perfectly line up but it wouldn't take much effort to add a new hole or two to properly install the jack. Since the original was also welded I do recommend doing the same with the new jack. Any welding should be done by a professional welder.

expert reply by: Michael H