Troubleshooting Noise Coming From Trailer Hub or Tire After Bump
Updated 08/08/2018 | Published 08/07/2018 >
Question:
I have a 14 ft enclosed arising trailer. Whenever I hit a bump I get a loud clicking sound coming from my right front hub or tire. The sound will continue for four or five seconds after hitting a bump. I replaced the wheel bearing but keep getting the same noise. I looked inside the hub but didn’t see anything out of the ordinary. The hangers are in good condition and I don’t see anything wrong with the axle. I have had the trailer for six years now and I have replaced the bearings and one hanger. What could be causing this noise?
asked by: Adam S
Expert Reply:
Since you hear a loud sound only after hitting a bump, it doesn't sound like a bearing issue or a hub issue. It sounds like a suspension or maybe even a tire issue. If it were a bearing, hub, spindle of brake issue, you would hear it at other times as well.
The hanger wouldn't cause any noise as it is fixed in place, so you will need to consider the axle hardware where the springs meet the spring seat welded to the axle, the leaf springs, the equalizer, and even the tires. If you have tires that have the balancing beads inside, the bead may even cause some noise. It sounds to me like there is a suspension component or hardware that is failing.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: timken l44649
- Search Results: 47336
- Shop: Floor Mats
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: Timken 473336 Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles
- Shop: Timken Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Shop: WeatherTech Front Auto Floor Mats - Black
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Troubleshooting a Rhythmic Clicking Noise in One Wheel of Tandem Axle Horse Trailer
- Q&A: Which Timken Grease Seal for Trailer Hub Replaces GS-1719 DL
- Shop: Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Search Results: trailer tires and wheels
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Trailer Wiring
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer wiring
- Q&A: Recommended Flat Tow Setup for a 2026 Ford Maverick
- Shop: Brake Controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Choosing the Right Vehicle Suspension Upgrades

