Sewer Hub Fitting With 3" FPT End

Question

Question:

Hi , do u have the threaded holding tank fitting also in 3inch fat

asked by: Jack

0

Expert Reply:

I believe you were asking about a sewer hub and meant "FPT"; and the answer is yes we have the Valterra RV Sewer Hub with Flange - FPT - 3" # T1007.

expert reply by: Kyle S

0

Answer 1

Replacement toilet floor flanges are universal so it will work, but you can determine the correct one based on the threading of your current flange. They will work with 3" pipes which you need to have as well. - Male Thread: Replacement RV…

view full answer...

Answer 2

I reached out to Valterra for the dimensions of the Valterra RV Toilet Floor Gasket with Hold Down Bolts #Q23653VP, and they sent me the accompanying dimensional diagram. It has an outer diameter of 4-3/4", an inner diameter of 3-1/4" and…

view full answer...

Answer 3

We do not have a way to know which original part was installed on your 1998 Sunny Brook travel trailer but we do offer such items. Valterra offers their 3-inch Toilet Flange with MPT (male pipe threads) as part #T05-0782 and a similar items with…

view full answer...

Answer 4

We have the Replacement RV Toilet Floor Flange #T05-0784 which has a 4 inch diameter hole and .541 inches of usable female threads. But if you need something 4 inches long where the threads are we do not have anything.

view full answer...

Answer 5

Hello Mark, thanks for reaching out. I had one of the LaSalle Bristol Toilet Floor Flanges #3446336345 pulled from our warehouse so I could measure. The overall height of the flange is 1-5/8".

view full answer...

Answer 6

Hello Brigitte, For a tankless water heater to replace your Suburban SW6D water heater, I recommend the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 16" Door #FR98SR. The #FR98SR will fit into the same…

view full answer...

Answer 7

Hey Michael, welcome back! The #DMC64JF is the newer production model of the #DOM37FR and is designed to replace it. They are pretty much the same and part of the 310/Part-Timer line. The overall dimensions are slightly different at 18-1/2" long…

view full answer...

Answer 8

Hey Ed, welcome back. It looks like we're all sold out of the Tamarack 215/75-14 tires and it doesn't look like we're getting anymore in. For a comparable option, I recommend the Provider ST215/75R14 Radial Trailer Tire item…

view full answer...

Answer 9

Hey Greg, welcome back! The Go Power Overlander Expansion Kit - 200 Watt Solar Panel item #34282182 includes the Overlander panel. It's a bit different than your current Go Power GP-PV-200M panel, however it is compatible. The solar panel…

view full answer...

Answer 10

Hello Martin, Great question. The Aqua-Magic VI #TH37SE uses the same standard 2-bolt pattern and seal style as the Aqua Magic IV. So from a bolting-it-down standpoint, they’re compatible. The only thing you really need to double-check is the space…

view full answer...

Answer 11

The Dometic 310 Series Toilet requires a 10" rough-in (distance from wall to center of toilet flange) whereas the Dometic 320 Series Toilet requires an 11" rough-in. I recommend measuring to confirm but if the previously toilet was…

view full answer...

Answer 12

Due to the age and limited popularity of your toilet we currently do not carry any repair parts for it. If you are having several issues you might consider changing it for a Dometic 310 #DOM57FR as these repair parts are more readily available and…

view full answer...

Sewer Hub Fitting With 3" FPT End

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching