Parts Needed to Add Electric Brakes to 3,500 EZ Lube Spindle Axle
Updated 06/20/2018 | Published 06/18/2018
Products Featured in This Question
Question:
I have a BigTex utility trailer with one 3,500# EZ Lube Axle w/ Brake Flanges. I want to add electric brakes. What parts do I need? Thanks
asked by: Edwin S
Expert Reply:
Since we know you have 3,500 lb EZ lube spindles we can easily pick you out the components needed to add electric brakes to your trailer. First you'd want a hub. For that the most common solution is the hub part # AKHD-545-35-EZ-K. This fits 3,500 EZ lube spindles and has the very common 5 on 4-1/2 inch bolt pattern for wheel attachment. If instead you have a 6 on 5-1/2 inch bolt pattern you'd want the part # AKHD-655-35-EZ-K.
Then for brake assemblies you'd want the self adjusting assembly kit part numbers # AKEBRK-35-SA.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Search Results: 10~9 seal
- Search Results: bearing l44649 trailer bearings races seals caps
- Search Results: l44649 kit
- Q&A: Can L44643 Bearings and L44649 Bearings Be Exchanged
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Grease Seal
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Is There a Bolt On Bracket For Safety Chains on a Trailer
- Q&A: Bolt Size Recommended For Channel Style Tongue Trailer Coupler Installation
- Q&A: Which Trailer Tire Size is best for a Jet Ski Trailer that has 4.80-12 Tires
- Q&A: Tee Nee Boat Trailer Coupler Installation with Bolt Holes Misaligned