How to Pick Out Replacement Roof Vent Cover for Trailer

Updated 05/30/2018 | Published 05/26/2018

Question:

For 2007 sundowner suite 777 warmblood. It is a single vent not double I just need cover. How much

asked by: Betty

Expert Reply:

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.

The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent.

If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, part # BV0554-03, that you referenced, then that is most likely the correct vent for your trailer as long as the measurement matches. There are also vent covers with plastic snap-in style hinges and different raising and lowering arm styles.

Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.

I have included a graphic of the various hinges for you to compare.

expert reply by: Jameson C