Complete Towing Package for a 2011 Ford Fusion Hybrid

Published 08/09/2011

Products Featured in This Question

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(201)

$204.47

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(78)

$55.44

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2621)

$16.53

2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs

(2621)

$18.47

Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs

(2328)

$31.99

etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome

(3575)

$33.91

Question:

Will the #24865 hitch and the #118422 wiring harness fit my 2010 ford fusion Hybrid ? Also do I need to obtain the drawbar, hitch pin, and trailer ball separately ?

asked by: Norm

Expert Reply:

Yes, the Draw-Tite Sportframe Trailer Hitch, # 24865, and the Tow Ready, the T-One Vehicle Wiring Harness, # 118422, will fit all styles of the 2011 Ford Fusion, including the hybrid model. We have a video of this hitch being installed on a 2011 For Fusion Hybrid and a video of the wiring harness being installed on a 2010 Fusion which should be very similar to your 2011 model.

The ball mount is separate, you will need the Draw-Tite Ball Mount, # 3594, which includes a pin and clip. A properly sized hitch ball is also needed, and either the 1-7/8 inch hitch ball , # 19256, or the 2 inch hitch ball # 19258, should be correct for your trailer coupler.

You may also want to consider a hitch lock to secure the drawbar to the trailer hitch. Our etrailer.com Trailer Hitch Receiver Lock, # e98879, would work great with the # 24865 hitch and # 3594 drawbar.