Powered Landing Gear Jack Recommendation for Kiefer Built Horse Trailer with RAM Jacks

Question

Question:

We have a Kiefer built 3 horse slant. 5200 gvw. the jack is a RAM model 12000 series. My wife wants an electric jack for it. I have more pics.

asked by: Craig

0

Expert Reply:

The Ram brand landing gear jacks you have now are designed to fit the most common style of trailer mounts so for an easy replacement landing gear set that is powered you'd want the Reese kit part # RP500708 which is a dual motor powered kit that would work well.

expert reply by: Jameson C

0

Answer 1

I have a replacement jack option for you, I reached out to my contact at Fulton and the Fulton Magnum Series 12000lb got discontinued a few years back, and all of the rebuild kits and replacement parts were discontinued with it. The only option is…

view full answer...

Answer 2

Bulldog Powered-Drive Kit #BD1824200100 comes with the parts needed to install and use the kit with your Fulton Magnum 12K jack as long as it was made after 2003. If it was made in 2003 or earlier then there isn't a kit for it.

view full answer...

Answer 3

The photos you attached did not come through but in order to replace your Fulton 12K Magnum Series HD Jack, I recommend using the Bulldog Square Jack part #BD182701 which has a 12,500 lbs capacity and offers up to 12-1/2" of lift. Unfortunately,…

view full answer...

Answer 4

MaxxAir vents that have an integrated rain sensor, like the MaxxFan Plus Roof Vent #MA00-04500K, do not allow you to override the sensor. If you were to override it you would be allowing rain to hit the motor which could definitely damage it. The…

view full answer...

Answer 5

Since Equalizer specifically recommends a hitch ball at or less than 2-3/8 inches in length with a 1-1/4 inch diameter shank you would want to use the part #63018 for a 2 inch ball or part #63019 for a 2-5/16 inch hitch ball with the part #EQ37100ET.…

view full answer...

Answer 6

The motors for the Reese Electric 5th Wheel Landing Gear Set #RP500708 have to be installed in the upright position. From the top of the upper weld stop to the top of the motor measures 12-1/2" so if you have that much space in your current…

view full answer...

Answer 7

Yes, the Reese Electric 5th Wheel Landing Gear Set part #RP500708 is exactly what would be needed to upgrade from a single landing gear motor to a dual landing gear motor setup on a 2006 Keystone Raptor Toy Hauler. It would not require any…

view full answer...

Answer 8

The Reese landing gear part #RP500708 fits the standard RV landing gear mounting bracket setups on RVs of 15-1/2 inches from inside to inside on mounting brackets and 17-1/2 inch from outside to outside. I'd be willing to bet this is what you…

view full answer...

Answer 9

Aside from the weight capacity of the jacks and their speed, they also have different mounting bracket locations. If you don't mind potentially having someone do some cutting and welding on your trailer then either one will work great for you. If…

view full answer...

Answer 10

Hello Oscar, thanks for reaching out. Yes, a motor can be added to the Stromberg Carlson Manual Landing Gear Set #LG-183708. You can use really any standard landing gear motor. What I recommend is the following: - Motor and Switch Kit for Stromberg…

view full answer...

Answer 11

Though I was unable to find out anything about your current 12534 motor, we may still have a more heavy duty option available for you. The Lippert HD 6,500 lb Motor #LC196308 will fit the standard gearbox that is on most landing gear, like the…

view full answer...

Answer 12

Hello Joey, thanks for reaching out. We should have a motor for you, but there is no way to look up a make and model of RV to know exactly what motor is the right replacement. RV manufacturers just do not list that kind of information online.…

view full answer...

Powered Landing Gear Jack Recommendation for Kiefer Built Horse Trailer with RAM Jacks

Continue Researching