Should Trailer Have Bias Ply and Radial Tires Mixed
Updated 04/10/2018 | Published 04/09/2018
Question:
Is it ok to mix the two with trailer tires? If you have one Radial and one Bias? Thanks
asked by: Chris
0
Expert Reply:
We definitely do not recommend mixing bias and radial tires on the same axle. You can probably get by with mixing bias and radial tires on different axles but we still would not recommend it.
Also, if you plan on towing a lot we would urge you to use only radial tires. I have included a FAQ on trailer tires for you to check out.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Loadstar ST205/75D14 Bias Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 205/75-14
- 14 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Are Powder Coat Trailer Wheels Good for a Saltwater Boat Trailer ST205/75R14
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Difference Between Trailer Tires ST205/75D14 and ST205/75R14
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: Recommended Replacement Tire for my F78-14st Tire.
- Q&A: Recommendation For Budget Friendly ST205/75D14 Trailer Tire
- Q&A: Best Weight Distribution System For A 2014 V-Cross Vibe Limited Series M-6504
- Q&A: Looking To Replace Tie Down Engineering Brake Pads And Rotors
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How Much Does a Boat and Trailer Weigh?
- Article: How to Choose a Trailer Hitch Coupler
- Article: Printable Trailer Bolt Hole Pattern Template