Can the Curt # C17201 Sway Control Ball and Plate be Used with Camco Eaz-Lift WD System
Updated 04/06/2018 | Published 04/05/2018
Question:
Will the Curt ball plate work with eze lift sway control bar
asked by: Charles L
0
Expert Reply:
Although the actual ball size of the Curt # C17201 and the ball that comes with the Eaz-Lift system have the same size, the bolt hole locations are slightly different.
We have heard that you can use the Curt to replace it but the bolts can be a little difficult to install due to the bolt hole location differences. You either need to use the same hardware and same mounting holes or drill new holes and use the correct hardware to create a secure hold.
expert reply by:
Jon G
0
click to enlarge
Product Page this Question was Asked From
Replacement Ball and Plate Assembly for Curt Friction Sway Control System
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Ball
- CURT
more information >
Continue Researching
- Q&A: Difference Between Underslung and Overslung Coupler For Weight Distribution System
- Q&A: Replacement Option For Norcold N306.3 RV Fridge
- Q&A: Reese Towpower 3216 Chain Kit Availability and Replacement Option
- Q&A: How To Install The Replacement Ball and Plate Assembly for Curt Friction Sway Control System
- Q&A: Recommended Weight Distribution System for a 7,000 lbs Big Tex 70DM Car Hauler
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: EOH Actuator and Brake Lines For Nucamp Tag XL Boondock Adding Disc Brakes
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Determining Trailer Tongue Weight
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size