Thickness of Trailer Axle # 20440I-EZ-60 Including Spring Seat
Updated 04/04/2018 | Published 04/02/2018
Question:
What is the vertical dimension of this axle from spring seat face to top of the axle tube? What is the recommended clearance between the top of the axle tube the the trailer frame?
asked by: Mike
0
Expert Reply:
The overall thickness of the trailer axle part # 20440I-EZ-60 including the spring seat is 2-1/4 inches. The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches from the axle to the frame. Typical trailer leaf spring deflection is 1-1/2 inches.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Can Trailer Axle Spring Seats be Relocated If Needed
- Q&A: Axle Replacement 1720 Harbor Freight Trailer
- Q&A: What Is Needed To Swap An Axle And Hubs To American Parts On A Harbor Freight Trailer?
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Q&A: Solution for Needing Replacement Bearing Kit for Older Boat Trailer Bearing Numbers 15118 09074
- Q&A: Looking for Replacement 5 Lug Hub with Bearings L44649 Pre Greased
- Q&A: Spare Parts for Harbor Freight HaulMaster Utility Trailer 90154
- Article: How to Measure a Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Lighting Requirements
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Most Popular Wheel Bearings
- Article: Where to Position the Trailer Axle?