Curt Weight Distribution Shank Compatibility with Equal-I-zer Weight Distribution System
Updated 04/03/2018 | Published 04/01/2018 >
Products Featured in This Question
Question:
Will the Curt C17100 shank work with an Equalizer 90001000 sway/weight distribution hitch? I have a 2004 F150 XLT with a 5.4L. I am pulling a 23foot TT at about 5000 pounds.. The hitch is a bit overkill for the rig but I bought for the future...eventually a newer truck and larger TT.
asked by: Kent
Expert Reply:
The Curt Adjustable Weight Distribution Shank # C17100 will work with the # EQ37101ET which is the 90001000 system you referenced. That system is recommended for total tongue weights between 600 and 1000 lbs. That total tongue weight includes the loaded tongue weight as well as any weight behind the rear axle of your truck.
If your total tongue weight is lighter than this with your current trailer, it will create a rough ride and you will want a different system.
This system does come with a hitch ball, however you will need a thin walled socket like # ALL643216 or # EQ70-00-4800 to install it.
Product Page this Question was Asked From
Curt Adjustable Weight Distribution Shank - 8"
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 7 Inch Rise
- Trunnion - 6 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: shank
- Q&A: Distance From Top of Curt Shank to Center of Topmost Adjustment Hole
- Video: Breaking Down the Curt Adjustable Weight Distribution Shank
- Video: Review of Xtreme Heaters RV Heaters - Small Boat RV Heater 400W - XH54FR
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts w/ 2" Receivers
- Shop: Curt Adjustable Weight Distribution Shank - 8"
- Q&A: Recommended Weight Distribution Shank for Low Ground Clearance
- Q&A: Troubleshooting Height Adjustment for Reese Weight Distribution System
- Q&A: Is Curt Weight Distribution Shank #17100 Compatible with Fastway Weight Distribution
- Q&A: Recommended 7 Hole 2" Shank for a Weight Distribution System
- Q&A: Recommended Weight Distribution System with 5 Inch Rise for 2007 Toyota Sienna
- Q&A: Will Curt Weight Distribution Shank Work in Place of Equal-i-zer Shank for 2 Inch Receiver
- Search Results: equalizer hitch
- Search Results: husky shank
- Search Results: fastway
- Search Results: equalizer shank
- Search Results: accessories and parts
- Search Results: weight distribution hitch
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 7" Rise, 3" Drop - 400 lbs TW
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 6,000 lbs GTW, 600 lbs TW
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement




