Grease Seal for Spindle that is 1.68 Inches in Diameter
Updated 03/28/2018 | Published 03/27/2018 >
Products Featured in This Question
Question:
I have a tracker trailstar boat trailer. The hub on the spindle for the grease seal measures 1.68. Do I need this 1.719 grease seal. This is the one they suggest and it is a triple-lip seal. I am getting water in my hub.
asked by: Joe G
Expert Reply:
There are grease seals with inner diameters of 1.687 inches, # 168255TB, or 1.688 inches, # 168233, that would be a better fit. If the outer diameters match the inner hub bore diameter then you can use one of them instead.
Seal # 168255TB has an inner diameter of 1.687 inches and outer diameter of 2.561 inches.
Seal # 168233 has an inner diameter of 1.688 inches and outer diameter of 2.332 inches.
The seals in set # RG06-050 have an outer diameter of 2.565 inches so that would mean # 168255TB would be the best option. That 4 thousands of an inch difference wouldn't be an issue.
Product Page this Question was Asked From
Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- EZ Lube Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- 3500 lbs Axle
- 4200 lbs Axle
- 4400 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: brake line fittings
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Dexter Oil Seal - Double Lip - I.D. 1.687" / O.D. 2.561" - 3.7K to 4.2K Axles - Qty 1
- Video: Installation of the DeeMaxx Disc Brake Kit
- Video: Dexter Hydraulic Brake Line with Fittings Review
- Video: All About the DeeMaxx Disc Brake Kit
- Shop: DeeMaxx Hydraulic Brake Line Kit - Tandem Axle - 20'
- Shop: Dexter Hydraulic Brake Line with Fittings - 17-3/4" Long
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Female and Male Inverted Flare - 18"
- Video: Review of Dexter Trailer Bearings Races Seals Caps - EZ Lube Grease Cap Plug Kit - DX87HR
- Search Results: 021~091~00
- Search Results: grease fitting
- Search Results: dexter vault
- Video: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles Review
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Replacement O-Ring for Dexter Vault Hybrid Lubrication System - 1.98" Cap
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer leaf springs
- Search Results: surge break
- Search Results: bushings
- Q&A: What is Most Common Leaf Spring Length for 3,500 lb Trailer Axle
- Video: In-Depth Review of the DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug
- Q&A: New Brake Assemblies, Hub/Drums, Brake Lines, and Bearing Buddy for Trailer with 3,500 lb Axle
- Shop: Trailer Hitch
- Q&A: How to Determine Correct Torque Setting for New Disc Brake Setup on Boat Trailer
- Q&A: Trailer Wheel Torque Spec Chart
- Q&A: Inner Diameter of the 1.98" Dee Maxx Stainless Steel Drive-In Grease Cap w/ Plug
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Shop: Trailer Wiring
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Vault Hybrid Lubrication System - DX52UR

