Locating VIN on Late 1960s or Early 1970s Fan Styler Liner Camper
Updated 11/16/2024 | Published 03/26/2018 >
Question:
Where to find VIN number on late 60s or early 70s Fan Style Liner camper that is 20-21ft.
asked by: James S
Expert Reply:
A trailer's VIN is typically found somewhere on the trailer tongue, near the coupler. If you do not see any information there, I recommend simply examining the trailer frame for any numbers that you might find stamped into the frame or possibly a sticker (although a sticker is likely worn off by now on your camper).
If you examine the trailer and cannot find anything, you may be able to have a new VIN assigned to the trailer by your State Police. This can vary from state to state, so you will simply need to check with your State Police or DOT to see if this is possible.
Product Page this Question was Asked From
Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 3500 lbs GTW
- 2 Inch Channel
- Trigger Latch
- 2-Bolt
- Marine Grade
- etrailer
more information >
Continue Researching
- Q&A: How Thick of a Panel Will Fit Into # PF38FR?
- Q&A: Recommended 2" Coupler for a 2" Wide Trailer Tongue
- Q&A: Recommended Replacement Strut for a Snowmobile Trailer
- Q&A: Is There A 1.5" Hitch To 2" Hitch Adapter?
- Q&A: Dimensions of Channel Tongue Trailer Couplers for 2 Inch Frame
- Q&A: Replacement Axle For a Stealth 7.5X12 Cargo Trailer 3,500-lb 93.5" Hub Face 77.5" Spring Center
- Q&A: What Is the Proper Oil for Oil Bath Hubs on Trailer Axles?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Trailer Lighting Requirements
- Article: Trailer Maintenance Schedule


Al B.
11/16/2024
On my 1975 Fan Lee Line 600 I did locate a VIN. What I cannot locate is the empty weight of the trailer (vs approx total weight of 5225) the former I need for a new state title. Even the factory sales docs show a variety of specs but exclude this one. Hitch weight is listed at 680 lbs. Any clues or calculatoins I can use to determine this? I've researched on the web but so far unable to locate. Any info appreciated.