Brake Controller Recommendation for a 2003 Ford Ranger
Updated 03/26/2018 | Published 03/23/2018
Products Featured in This Question
Question:
I have a 2003 ford ranger that I would like to put a break contoler on. I won’t be using it often, and won’t be hauling much of a load with it, however I would like to have the option. I’m capable of adding wires and such. The last time I installed one was years ago when you had to run a control rod to the break pedal. It looks like things have changed. Thanks in advance for your suggestions.
asked by: Ben B
Expert Reply:
Does your 2003 Ford Ranger already have a 7-Way trailer connector? If not then to install a brake controller you will need to also install # ETBC7. If you do already have a 7-Way connector you will just need # 5506.
For a brake controller I recommend the Brake EVN # TK63VR. This is a "nothing fancy" proportional brake controller that will be great for your application. Proportional controllers like this will apply the trailer brakes in proportion to how much the tow vehicle is braking.
I have included some links that will help with the installation. Not all of it will apply to your application so just follow the parts that do.
Product Page this Question was Asked From
Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Plug-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LCD Display
- Single Trailer Only
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is Torque Spec for Castle Nut of Dexter 3,500 lb Axle
- Q&A: Can I Add Two Side Marker Cameras To Furrion Vision S+ Camera System?
- Q&A: How Does Curt TriFlex NEXT Brake Controller Mount
- Q&A: Brake Controller Wiring Harness and Air Bags for 2014 E-450
- Q&A: Availability of Flat Mount Coupler With 5" Mounting Hole Spacing
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Can You Transfer a Trailer Brake Controller from Ford to Chevy?
- Q&A: Recommended Brake Controller for a 1997 Ford Explorer
- Article: Brake Controller Installation: Starting from Scratch
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)