Locating Replacement Tail LIghts for 2001 Featherlite Horse Trailer
Updated 03/23/2018 | Published 03/22/2018 >
Products Featured in This Question
Question:
need replacement parts for 2001 Featherlite horse trailer, I need two tail lights and 3 door locks. I think your Global ink RV door entry will work for doors but my lights are encased in a flexible rubber casing not sure about replacements??
asked by: Cheryl A
Helpful Expert Reply:
We do have a large selection of trailer tail lights that may work as replacements for your 2001 Featherlite Horse Trailer.
Based on your description and some pictures I found online of this trailer, the Optronics LED Trailer Tail LIghts w/ Grommet # TLL12RK may be a good option. This is a set of 2 oval trailer light lights with red lenses that include black grommets like what you mentioned. They measure 7-9/16 inches long, 2-3/4 inches tall, and 3/4 inches deep. I recommend taking a few measurements on your current assemblies to see if these will be a good fit. Otherwise, if you can tell me the dimensions of the lights you are replacing, I will be happy to see if we have something else that will work. You may be able to find a part/model number for the lights somewhere within the housing that will also be helpful.
I have attached a short video demonstration on this tail light kit that you can check out. I have also attached a link that will take you to our available selection of trailer tail lights for you to look through.
The Global Link RV Entry Door Locking Latch Kit # 295-000019 that you also referenced will do a great job of securing the interior of your trailer. It features a sturdy steel construction and can be keyed alike if you need more than one (just select the "Keyed Alike" option on the product page drop-down menu). The lock measures 3.47 inches wide, 4.28 inches tall, and fits doors that are 1-1/4 inches to 1-1/2 inches thick.
I have included a video demonstration on this lock set that you can also check out.
Product Page this Question was Asked From
Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: Hole Size Dimension for Optronics LED Tail Light with Grommet
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Will Adarac Pro Series Ladder Rack Work With TruXedo Hard Roll Up Tonneau Cover?
- Q&A: How Far Apart Are The Bolt Holes On etrailer Scissor Jacks e56VV ?
- Q&A: Can I Plug the etrailer Electric Trailer to the OEM 7-Way On a 2016 GMC Sierra 2500
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: Recommended Trailer Tail Lights To Replace Older Glo-Brite 9553
- Q&A: Replacement For Kwikee Control Module 1510000140
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)



