Dimensions of the Rota-Flex 5th Wheel Pin Box # 328330

Published 03/22/2018

Products Featured in This Question

Trailair Rota-Flex 5th Wheel Pin Box - Lippert 1621 or 1621HD - 18,000 lbs

(95)

$722.55

Curt Rota-Flex 5th Wheel Pin Box - Lippert 1621 - 21,000 lbs

(95)

$845.70

Question:

Hey Jason, I just found out that the pin box is rated 21000,,, so do I need a 5 in OR 5 3/8 in plate the stock number is a 331760, thanks again for your help

asked by: Randy G

Helpful Expert Reply:

The Trailair Rota-Flex 5th Wheel Pin Box - Lippert 1621 or 1621HD - 18,000 lbs # LC328330 does require capture plates for the Demco Hijacker autoslide that is similar to the Pull Rite Autoslide you have. The measurement from the front of the plate to the king pin is 4-1/2 inches. The overall plate is 11.387 inches by 12.655 inches.

expert reply by: Jason S

click to enlarge

Randy G.

3/22/2018

Hey Jason, I just found out that the pin box is rated 21000,,, so do I need a 5 in OR 5 3/8 in plate the stock number is a 331760, thanks again for your help

Jason S.

3/22/2018

I was able to research for you that the Trailair Rota-Flex 5th Wheel Pin Box - Lippert 1621 or 1621HD - 21,000 lbs # LC328329 will require the 5" measurement from the leading edge to the king pin and will use the capture plate number 331760 for your Pull Rite 5th Wheel Hitch. You do not want the 5-3/8 inch plate number 331756.