Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Set up your PullRite SuperGlide hitch to auto-slide with this capture plate for standard OE MORryde pin boxes with part numbers starting with SPB. Fits 12-1/2" wide MORryde skid plates.
This capture plate is made for standard MORryde pin boxes that came as original equipment on the trailer. These OE MORryde pin boxes have part numbers that begin with SPB. Check the part number on your pin box before ordering to make sure this is the correct capture plate for your setup.
Your PullRite SuperGlide hitch needs the king pin to stay locked in position so the hitch head can respond to trailer movement. This capture plate keeps the king pin from rotating in the hitch, allowing movement from your fifth wheel to activate the automatic sliding action for added cab clearance during tight turns.
This plate is designed for standard OE MORryde pin boxes with a 12-1/2" wide skid plate. It is not a universal MORryde capture plate, so the SPB part number check matters before installation.
The Quick Connect design uses the included set screw and jam nut to secure the capture plate to your trailer's pin box skid plate. Once installed, it creates the locked connection your SuperGlide hitch needs for proper automatic sliding operation.
Heavy-duty steel construction gives this plate the strength needed for regular fifth-wheel towing, while the black powder coat finish helps protect it from corrosion and road grime.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the PullRite SuperGlide Quick Connect Capture Plate for the 12 and a half inch wide MOR/ryde Pin Boxes. Now basically you'll use this capture plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. Basically this is gonna allow you to tow your fifth wheel with the PullRite SuperGlide hitch. Attaches to your skid plate on your trailer's pin box.
And basically with the wedge on it, keeps the kingpin from rotating in your hitch head. This will allow movement of your trailer to be transferred to the hitch, so that can automatically glide to provide clearance you'll need for 90 degree turns. As we mentioned, this part number here works with the MOR/ryde pin boxes and the skid plate on the pin box must measure 12 and a half inches wide. If you notice on the bottom by the wedge here, it includes this set screw and the jam nut for attaching this capture plate to fit the MOR/ryde pin boxes. It does resist corrosion.
It's a durable black powder coat finish on the steel. Now also, I always want want you to remember if you have any questions regarding this product or any of our products, please don't hesitate to contact us via phone, chat, or email or if you've purchased this product or any other product from us, please send us pictures of it being used in your application 'cause we'd love to see how that product's working out for you. But that's gonna do it for a look at this PullRite SuperGlide Quick Connect Capture Plate for the 12 and a half inch wide MOR/ryde pin boxes.
Customer Satisfaction Score:
55% were satisfied with this product
45% of customers were not satisfied
Ratings & Reviews
Plate did not fit my pin box even though it said it was for the model I have. I ended up driving over an hour away just to get a new plate so I could pick up my brand new trailer from the dealer. That plate didn’t fit either. I had to grind off part of my pin box for it to seat all the way.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
5/5/2026
Sorry to hear that, Tristan. Do you know which pin box you have on your new camper? And did you want to get this one returned?