Recommendation For Adjustable And Easy To Use Fifth-Wheel-To-Gooseneck Coupler Adapter
Updated 03/14/2018 | Published 03/13/2018 >
Products Featured in This Question
Question:
I would like to know if this product is a bolt on adapter or if it can be easily removed and put on a different trailer. I tow many different styles of trailers and do not want to have to have a fifth wheel plate on the flat deck of my truck. I am looking for an adapter that I can install and remove in a short amount of time without drilling or welding .
asked by: Darcy
Expert Reply:
Based on your information, I recommend the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter, Item # AM3100. It fits a standard 2-5/16 inch gooseneck hitch ball and can be installed in about an hour. It works with standard or extended pin boxes but an extended pin box can be no longer than 24 inches. It is not recommended for cushioned or air ride pin boxes.
The Ranch Hitch universal adapter is rated for up to 24,000-lbs towing capacity and up to 6,000-lbs of tongue weight capacity. It has a vertical adjustment range of 3 inches: 11-3/4-inches when collapsed to 14-3/4 inches when extended. It is fitted with a remote release cable so that you do not have to climb in and out of your truck bed to lock the coupler. All the required hardware for the bolt-on installation is included.
For proper functioning, you need to measure your truck and trailer for the adapter. Measure from the pin plate down to the top of the ball in your truck bed. The measurement should fall between 11-3/4 inches (when the adapter is collapsed) to 14-3/4 inches (when the adapter is extended). The adapter also needs 5 to 6 inches of clearance from the trailer overhang to the truck siderails.
We also offer a slide hammer to ease installation of the inner threaded collar around the trailer king pin, Item # AM3103. Safety chains are also available, Item # AM3109.
I have attached additional information and videos to assist you.
Product Page this Question was Asked From
Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter
- 5th Wheel Gooseneck Adapter
- Adapts Trailer
- 5th Wheel Trailer to Gooseneck Hitch
- No Extra Clearance
- 24000 lbs
- Bolts Over King Pin
- Not Shock Absorbing
- Andersen
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Victron SmartSolar 100/50 MPPT Solar Charge Controller - 12V/24V - 50 Amp
- Shop: Replacement RV Sliding Mirror Door Catch
- Shop: Replacement Stand Off Assembly for Stromberg Carlson Universal Exterior RV Ladder - Black
- Shop: RV Interior Lighting
- Q&A: Replacement Compartment Door Slam Latch For A 2021 Forest River Riverstone Reserve 3850RK
- Shop: Gustafson 12V LED RV Dome Light - Single - 5-7/8" Long x 3-3/4" Wide - White
- Shop: Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter
- Shop: Replacement Section for AC/DC Power Distribution Panel - 35 Amp
- Shop: Camco Cyclone RV Plumbing Vent
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Recommended Gooseneck Pin Box Adapter
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Can the Convert a Ball Fifth Wheel Adapter be Used on a Mor/Ryde Pin Box
- Q&A: Convert-A-Ball 30K Gooseneck Coupler Compatibility for B&W Turnover Ball with Heavy Load
- Article: Best 5th Wheel to Gooseneck Adapters (2023)
- Q&A: 5th-Wheel-to-Gooseneck Coupler Adapter For Recessed Gooseneck Ball In Flatbed
- Q&A: What is Normal Temperature Rating for Trailer Hubs
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: 5th Wheel to Gooseneck Adapters
- Article: How to Install E-Track in 3 Easy Steps



