Does etrailer.com Trailer Hub part # AKIHUB-440-2-1K Fit with 12 inch Diameter Trailer Wheel
Updated 03/12/2018 | Published 03/11/2018
Question:
On the 4x4 hubs, want to make sure I get the 4x4 hubs that support the larger 12inch 4.8-12 via the hub pilot diameter being different than the 8inch wheels. Dont seem to see the pilot hub dims on the 4 on 4 idle hub pages?
asked by: Ryan
0
Expert Reply:
The trailer hub part # AKIHUB-440-2-1K that you referenced has a mounting flange and snout diameter that is compatible with 12 inch trailer wheels like you said you were needing.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Replacement Hub for a Malone LowBed MicroSport Trailer MAL25FR
- Q&A: How To Read Age of Tire From DOT Number Printed on Tire Sidewall
- Q&A: Possible Solution for Replacing Trailer Bearing L44543
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Can Trailer Hubs Be Shimmed to Adjust Camber
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: How to Replace or Install an RV Roof Vent