Parts Need to Flat Tow a 1989 Nissan Pickup Truck
Updated 07/19/2011 | Published 07/18/2011 >
Products Featured in This Question
Question:
Is it a bolt on? Is there any machining required? Is there any special requirements needed? Which tow bar do I need? Will this work pulling over a washboard road slowly? Thanks
asked by: Del B
Expert Reply:
It is possible that there could be some drilling involved when installing Roadmaster Base Plates, # 305-1, if a hole for the included hardware is not present. Otherwise, if that hole is present, it is bolt on application. There should not be any machining that needs to be done or special requirements. As long as you take your time on the bumpy washboard road, there should not be any problems.
For a compatible tow bar, I recommend the Roadmaster Tracker, # RM-020. You will also need safety cables, a lighting solution, and supplemental braking. For safety cables, I recommend Roadmaster Coiled Cables, # RM-643. The coiled design helps to prevent the cables from touching the ground.
For lighting, if you do not plan on towing the vehicle often, you can use a magnetic light kit, # RM-2120. If you do plan on towing it often, I recommend installing diodes using Roadmaster Universal Hy-Power Diode Wiring Kit, # RM-154. I have included a link to a video showing a typical installation of this kit for you.
Most states now require supplemental braking on the vehicle being towed. The easiest to use and set up is the Roadmaster Even Brake Portable Proportional Braking System, # RM-9400. This system applies the vehicles brakes in proportion to how much the tow vehicle is braking. This is the safest type of braking method and it saves wear and tear on both vehicles.
I have included a link to our series of flat towing FAQ articles for you to view.
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms
- Tow Bar Base Plate
- Fixed Draw Bars
- Visible
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It


