Recommended Wiring From Motorhome to RV 4-Pin Trailer Connector

Updated 03/06/2018 | Published 03/05/2018

Products Featured in This Question

Blue Ox 4-Diode Universal Tail Light Wiring Kit for Towed Vehicles

(198)

$79.26

Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional

(6662)

$169.94

7-Way Round RV Style Trailer Connector - Trailer Side

(377)

$13.57

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3401)

$106.82

Roadmaster Tow Dolly with Electric Brakes - 4,250 lbs

(9)

$3525.00

Question:

What do you offer for a wiring system to use the auto’s brake, turn and tails light off the RV 4 pin connector? How does your system connect to the 2018 Nissan Rogue, under the hood, fuse panel?

asked by: Jim E

Expert Reply:

For a wiring system for your 2018 Nissan Rogue to do what you desire will required the Blue Ox Tow Bar Wiring Kit - 4 Diodes # BX8848 and a 4-way connector on the front of your vehicle.

Your 2018 Nissan Rogue is not to be flat towed, but rather towed on a trailer if it is AWD or on a tow dolly if it is FWD. I recommend the Roadmaster Tow Dolly # RM-2050-1 for that and also brake controller # 90195 for the brakes. You will need to hardwire your motorhome wiring for that brake controller and use kit # ETBC7 for the wiring required. I've attached some videos to assist.

The dolly will also need a trailer connector like # A7WCB because it only comes with bare wires.