Timbren Axle Less Kit Recommendation for 2k Axle with Lift Kit and Jeep Wheel Bolt Pattern
Updated 02/23/2018 | Published 02/22/2018
Products Featured in This Question
Question:
I have a 2008 Fleetwood Cobalt I want to pull behind my Jeep with the wheels and tires on the trailer to match the Jeeps so I can share spare tires. The campers gross weight should be right around 2,000 lbs. and I would like about 4inch of lift. The camper is equipped with electronic safety brakes with a break-away cable activation. Not sure if I can re-use that mechanism or not? May want to upgrade to actual tow vehicle brakes later. Also, need 5 on 5.5 hubs to match the Jeep. I can get a different bolt pattern and drill out if necessary, as long as the hub face is flat.
asked by: Cameron T
Expert Reply:
We've had this question a few times in the past and we have been told a few times by Jeep owners that the Jeep bolt pattern is 5 on 5 inch which we'd have a solution for with the 2k Axle Less Timbren kit part # ASR2KHDS03 that you are interested.
For a hub and drum that fits that axle kit and has the correct bolt pattern you'd want the part # AKHD-550-35-EZ-K.
For brake assemblies you'd then want the part # 23-468-469.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommendation for Converting Fleetwood Neon Pop-Up to Axle-Less Suspension System with Jeep Tires
- Q&A: Recommended Timbren Axle-Less System with 5 on 5 Bolt Pattern Hubs for Overland Trailer
- Q&A: Availability of 2,000 Pound Timbren Axle-Less System with 6 Hub Face Dimension
- Q&A: Replacement Foot Plate for a Lippert Jack 359278
- Q&A: Is There a 3,500 Lb Idler Hub with Hub Bore Less Than 64MM
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How To Use Large Off-Road Tires on a 4x6 Utility Trailer
- Q&A: Timbren Axle Less System with 5 on 5 inch Bolt Pattern
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)