Replacement Frame Brackets for Fastway e2 Weight Distribution Systems

Question

Question:

Will these work with the old style L brackets? Or do I have to buy the whole L brackets kit.

asked by: Michael

0

Expert Reply:

The l-brackets on the Fastway e2 Weight Distribution Systems have not changed. As long as there are 6 bolt holes on the bracket then the Replacement Outer Link Plate part # FA93-02-5350 will work well for you. If you have an l-bracket with 8 bolt holes then this is an Equal-i-zer part and the Fastway outer link bracket will still work but not with the 4th and 5th bolt holes.

If you end up needing to replace the entire frame bracket assembly you can do so using the following:

Fastway:
(2) Replacement Outer Link Plate part # FA93-02-5350

(2) Replacement Sway-Control L-Bracket part # FA93-02-5150

(2) Replacement Inner Link Plate part # FA93-02-5200

(1) Replacement Hardware Kit part # FA92-02-9200

Equal-i-zer:
(2) Replacement Sway-Control Bracket part # EQ95-01-5600

expert reply by: Conner L

0

Phil

4/13/2026

How much do the L bracket assemblies weigh when assembled?

Answer 1

Hi Phillip! I do have another option for you, but you would need to purchase the Fastway parts separately. I have all those listed below as well as the quantity needed to replace both: Qty.2 - Replacement Outer Link Plate for Fastway e2 Sway-Control…

view full answer...

Answer 2

Hi Ruben! We have just what you are looking for with the Replacement Sway-Control Bracket #EQ95-01-5600. This can be used with 6,000 to 14,000 pound systems (yours is a 10,000 pound system), but it is only one bracket. You will need to order two of…

view full answer...

Answer 3

The Replacement Outer Link Plate #FA93-02-5350 is the bracket piece that you are needing for the Fastway e2 Weight Distribution #FA94-00-1061 that you have. I do recommend getting the Replacement Hardware Kit #FA92-02-9200 as this will have all the…

view full answer...

Answer 4

That is not normal wear for the L-Brackets on your Blue 2-Point #BLU75FR to be that worn. It looks like you have too much angle in the head, so I recommend trying to tilt the L-brackets a little to try and get the bar less on just that one edge, and…

view full answer...

Answer 5

Hey Chris, The Curt Frame Brackets #C17515 are for standard Curt TruTrack weight distribution systems while the kit #C25RV (17518) you're looking at is for the Curt TruTrack 2P weight distribution system. The standard TruTrack has trunnion bars…

view full answer...

Answer 6

Hey John, yes the E4 and the E2 weight distribution systems both use the frame brackets #EQ95-01-5600 as a replacement. Which do you have?

view full answer...

Answer 7

Hey Elaine, Typical removing the system when on dirt roads or making sharp turns/angles when backing up to park is recommended. Leaving them on can cause damage to parts of the system. However, in most cases the L brackets shifting is due to…

view full answer...

Replacement Frame Brackets for Fastway e2 Weight Distribution Systems

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching