Replacement Sway Control Bracket Parts And Hardware to 6,000-12,000lb Fastway E2 Weight Distribution
Question:
I have the FA94-00-1061 weight distribution hitch. The bracket that mounts on the trailer tongue that has the two welded mounting studs to mount the sway bar bracket has sheered one of the welded studs and the other stud in is poor shape. Is there a replacement part for this?? See attached picture.
asked by: Keith B
Helpful Expert Reply:
The Replacement Outer Link Plate # FA93-02-5350 is the bracket piece that you are needing for the Fastway e2 Weight Distribution # FA94-00-1061 that you have. I do recommend getting the Replacement Hardware Kit # FA92-02-9200 as this will have all the hardware you need for both side brackets. This will ensure that you are not reusing any hardware that also may be damaged.
If your Sway-Control L-Bracket # FA93-02-5150 or Inner Link Plate # FA93-02-5200 show any signs of damage they should also be replaced.

Products Referenced in This Question
Replacement Hardware Kit for Fastway Sway Control Brackets
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Brackets
- e2
- Fastway
more information >
Replacement Sway-Control L-Bracket for Fastway e2 Weight Distribution Systems - 6,000 to 12,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- Brackets
- e2
- L-Bracket
- Fastway
more information >
Replacement Inner Link Plate for Fastway e2 Sway-Control Bracket
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Link Plate
- e2
- Fastway
more information >
Replacement Outer Link Plate for Fastway e2 Sway-Control Bracket
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Link Plate
- e2
- Fastway
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 2-5/16" Hitch Ball - 10K GTW
- Weight Distribution Hitch
- WD With Sway Control
- Reduces Sway
- 2-Point
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 700 lbs
- 800 lbs
- 900 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Weight Distribution Adjustments for a 2005 Nissan Titan with a 2 inch Lift to Reduce Front End Sway
- Correct Fastway e2 Round Bar Weight Distribution System for 6,500 Lb Trailer
- How to Reduce Noise on a Weight Distribution Hitch
- Fastway e2 Weight Distribution w/ 2-Point Sway Control For Trailer With Tongue Weight Of 708 Lbs
- What is the Tongue Weight Rating of the Fastway e2 Weight Distribution Hitch 94-00-1061
- Is Fastway E2 1000 lb Trunnion Weight Distribution System Available Minus The Shank
- Recommended Solution to Help With Rear End Sag While Towing with 2017 Ford Expedition
- Recommended Shank For More Rise or Drop With Round Bar Weight Distribution Hitch
- Fastway Weight Distribution for a 5,500 Pound Loaded Horse Trailer
- Extended Length Weight Distribution Shank For Fastway e2 System To Clear Jeep Gladiator
- Comparing Differences of Weight Distribution Systems Between Chains and Platform Brackets
- Can Shank of Fastway e2 Weight Distribution System be Used in Rise and Drop Position
- Best Weight Distribution System for a 5,000 lbs 2022 Wolf Pup Black Laver Trailer
- How Do I Know What Drop Is Needed For My Lifted Ford F-250 With Bigger Tires?
- Fastway e2 Weight Distribution System Installation and Operation for Travel Trailer
- Torque Specs to Attach Head to Shank on Fastway Weight Distribution FA94-00-1061
- Recommended Weight Distribution System for a 2019 Wildwood 28RLSS
- Longer Shank for Fastway Weight Distribution System
- Does Hardware Need to be Replaced on Fastway e2 Weight Distribution When Making Adjustments
- Cushioned Weight Distribution Shank for 2-1/2" Hitch for Fastway e2 System
- Is 600 lb Tongue Weight WD System Rated Too Low for Trailer with 650 lb Tongue Weight
- Choosing Between 2 Point and 4 Point Weight Distribution/Trailer Sway Control System
- Recommended Weight Distribution System for Trailer With Dry Hitch Weight of 540 lbs
- Does Fastway Weight Distribution FA94-00-1061 Come with Hitch Ball Installed
- Parts Needed to Convert Fastway e2 Round Bar Weight Distribution Hitch to Trunnion
- Replacement Bars for Fastway e2 Weight Distribution
- How to Adjust Weight Rating of Fastway e2 Weight Distribution Hitch
- Will Shank On Fastway e2 Weight Distribution Hitch For GMC 1500 Truck Work On Chevy 2500 Truck?
- What Caused Bolts to Shear Off Fastway e2 Weight Distribution System