Recommended Air Compressor System to Add to Existing Air Spring System

Published 02/07/2018

Question:

i have air bags we fill up manually. is the an automatic kit i can add to these? 2010 gmc sierra

asked by: Paul

Expert Reply:

With your current air springs that you fill up manually on your 2010 GMC Sierra, there are many options available that will allow you to add a compressor system for push button adjustment instead.

For a single path system (meaning the two air springs will fill at the same amount at the same time), I recommend the Air Lift WirelessONE Compressor System for Air Helper Springs - Hand-Held Remote # AL25980. This system will give you a remote to monitor the psi as well as the ability to adjust inside our outside your truck cab.

If you want the ability to adjust the psi side to side for off-center loads, I recommend the Air Lift Load Controller Compressor System for Air Helper Springs - Standard Duty - Dual Path # AL25852. This will give you a single gauge with the ability to monitor and adjust the air pressure in either air spring.

This system will work with Air Lift, Firestone, or any other Air Springs that use 1/4 inch air lines.

expert reply by: Jason S