Fully Retracted Height of Powerbuilt 4K Bottle Jack ALL640405
Updated 02/05/2018 | Published 02/03/2018
Question:
is this bottle jack low enough to be put under a 2013 Hyundai Elantra?
asked by: Truong L
0
Expert Reply:
The Powerbuilt 4K Bottle Jack # ALL640405 when fully retracted to its lowest height stands 6-3/16-inches tall. This is with the cylinder fully retracted and with the threaded top cap fully tightened.
expert reply by:
Adam R
0
Product Page this Question was Asked From
Powerbuilt Bottle Jack - 6-3/16" to 12-1/16" Lift - 2 Tons
- Automotive Tools
- Bottle Jack
- Jacks and Jack Stands
- 2 Tons
- Powerbuilt
more information >
Continue Researching
- Q&A: Rear Sway Bar Recommendation for 2013 GMC Sierra 2500HD with Lance 825 Camper
- Article: Holiday 2025 | Best Gifts for Towers
- Q&A: Comparing Bronze and Nylon Bushings for Trailer Suspension
- Q&A: Comparing Roadmaster and Hellwig Sway Bars for Motorhome Built on E-450 Chassis
- Q&A: Troubleshooting Weak Braking on One Side After Installing New Trailer Brakes
- Q&A: Troubleshooting Electric Trailer Brake Assemblies
- Q&A: Troubleshooting Weak Trailer Brakes That Won't Lock Up with Override Lever of Controller Slid
- Q&A: Troubleshooting Brand New Trailer with Weak Electric Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Determining Trailer Tongue Weight
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide