Replacement Hardware Kit for the Curt Trailer Hitch Receiver Part # 13650

Question

Question:

I have a Curt 13650 hitch salvaged from a vehicle. In near new shape. Need the bolt kit to attach it. Do you sell such an animal?

asked by: Ted

0

Expert Reply:

In order to obtain the bolts to attach the Curt Trailer Hitch Receiver part # 13650 to a 2005 - 2012 Ford Escape, 2005 - 2011 Mercury Mariner, or a 2005 - 2011 Mazda Tribute you would want to use the Replacement Hardware Kit for Trailer Hitches part # RHK. Once you have arrived at the product page for the replacement hardware kit, you will need to enter "13650" in the Hitch Item Number box and "Curt" in the Manufacturer drop down in order to receive the correct hardware.

The replacement hardware kit comes with everything you will need to install the hitch on your vehicle including nuts, bolts, spacers, and fishwire.

expert reply by: Conner L

0

Answer 1

We do have replacement hardware for the Curt #13650. The bolts are easy to come by, but since you need the square hole spacers you'll have to get the entire kit. What you need is the Replacement Hardware Kit for Trailer Hitches #RHK. Enter the…

view full answer...

Answer 2

Hey Mark we do have a hardware kit for the 13570 Curt Trailer Hitch our item #C69VV. It is the Replacement Hardware Kit for Trailer Hitches item #RHK. This kit has the carriage bolts, square-hole spacers, serrated-flange nuts, flat washers, and…

view full answer...

Answer 3

You will need to order a Replacement Hardware Kit #RHK. Once on the product page you will select Curt from the drop down box and put in the hitch number as 13650. This will give you the hardware you need for your Curt Trailer Hitch Receiver #13650.

view full answer...

Answer 4

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

I'm going to have to recommend replacing the entire breakaway switch as I cannot locate any replacement parts for your Tap by Hoppy switch. I recommend the Tekonsha Trailer Breakaway Switch #420000 for a replacement. The wiring is long enough to…

view full answer...

Answer 9

The 24x64 etrailer Cargo Carrier for RV Bumper #e83YR and the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR are both constructed of black powder coated steel which is durable and corrosion resistant. They both also have a simple bolt on…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Replacement Hardware Kit for the Curt Trailer Hitch Receiver Part # 13650

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching