bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Trailer Lights Help Hub
  4. Trailer Lights Q&As
  5. Question 25783
Q & A Icon

LED Stop Turn and Tail Signal Lighting for a Motorcycle Pull Behind Trailer  

Updated 05/27/2011 | Published 05/25/2011



Question:

Can the two blinkers be connected to this light using a split diode [2 into 1] wire and connect to the turn wire or will I need to run 2 lights to get separate blinkers Motorcycle pull behind trailer

0

Expert Reply:

To meet DOT standards you will need to have both a left side and right side blinker on your motorcycle trailer. The LED Stop/Turn/Tail Light, item # STL69RRXB, is not separated so that the left side of the light and right side of the light can blink separately, so you will need two of these lights to complete your lighting setup.

I have seen many motorcycle trailers with two of the Sealed, 6-1/2 inch Oval, LED Trailer lights, item # STL22RB, mounted next to each other at the back of the trailer, using 2 rubber grommets, item # a70gb, and 2 pigtails, item # A45PB.

At this time we do not carry a diode that is recommended for the application you are suggesting.

expert reply by:
0
Bob G
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>