How to Choose the Correct Replacement Roof Vent Cover
Published 10/06/2017 >
Products Featured in This Question
Question:
I am looking for white RV vent cover lids to replace existing ones. I want to be sure to get the correct size. The vent opening measurement is 13inch and the lid outer measurement is 14.25. I see a smoke lid that fits these measurements BV0554-03 and a white one that is larger BV0554-01. What do you have in white that will fit what I need? Thanks for your help.
asked by: Russ R
Expert Reply:
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.
In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..
Product Page this Question was Asked From
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- Camco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is Wiper Width of Lippert Flat Wiper Seal
- Q&A: How to Find Replacement Slide Out Seal for 2015 Palomino Puma 32DBKS
- Q&A: How Many Times to Wind Solera Slide Topper for Proper Tension
- Q&A: Correct Slide Out Awning for Jayco Jayfeather 16RK
- Q&A: Foot Pedal Replacement For A Dometic 310
- Q&A: Expanding Go Power Solar on 2021 Jayco Eagle
- Q&A: Can I Patch My RV Roof Top Membrane Instead Of Replacing It
- Article: How to Replace or Install an RV Roof Vent
- Article: How to Repair an RV Roof
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Replace an RV Roof Vent Cover
- Article: How Much Trailer Can I Really Tow
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop

