Troubleshooting Lippert Ground Control 2.0 Leveling System Error Code

Updated 10/02/2017 | Published 10/01/2017

Products Featured in This Question

Digital Multimeter with 42" Long Test Leads - LED Display

(3)

$23.27

Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1

(179)

$594.71

Replacement Hall Effect Motor for Lippert Components Ground Control 3.0 Leveling System

(54)

$538.01

Question:

The camper has an error code LF. We have retracted the all four leveling systems 6inch and retracted as well as pushed the the Error code on the system box and push retract. And did a manual retract. However, we still have the error code LF. can you explain why.

asked by: Howard D

Expert Reply:

There are a couple of things as I talked with my contact at Lippert. You will need to follow this system perfectly of the error will not clear. You need to extend the front jacks 6 inches, then the rear jacks 6 inches, and then press and hold the retract button until the jacks are all retracted. This should clear the error.

If it does not, then use a multimeter like # PT89ZR check to make sure that left front jack is getting the proper battery voltage. If it is under 12V then it will continue to trip that error code. If it is getting the 12V or more voltage, then that jack may simply need to be replaced. You would need the motor # LC343758 or the complete Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1 # LC305340.

expert reply by: Jason S