Recommended Bearing Buddy for 2 Inch Hub Bore
Updated 05/24/2025 | Published 09/26/2017
Products Featured in This Question
Question:
My existing bearing protector measures 2 in across which size bearing buddy will fit thxs oh btw its a stratos boat trailer 95 model
asked by: Adam
Expert Reply:
We have a few Bearing Buddy Bearing Protectors available that are designed to fit a hub bore of around 2 inches in diameter, but not one that measures 2 inches exactly.
I recommend using a digital caliper like # PTW80157 so you can take an exact measurement of your existing hub bore. For example, the Bearing Buddy Bearing Protectors # BB1980A-SS are designed for 1.980 inch diameter hub bores while the Bearing Buddy Protectors # BB2047SS are compatible with hub bores that have a diameter of 2.047 inches.
I have attached a link that will take you to our available selection of Bearing Buddy Bearing Protectors that you can look through. You can filter through the different hub bore diameter sizes they are designed to fit by using the facets on the left side of the page.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.99 Inch
- 2000 lbs Axle
- 2500 lbs Axle
- 3500 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM30040
- Search Results: bearing buddy
- Video: The Low-Down on the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel
- Q&A: Can 8 inch Trailer Tires Handle Highway Speeds
- Search Results: hubs
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Search Results: trailer jack
- Search Results: trailer hubs and drums
- Search Results: trailer hitch ball mount
- Search Results: 4 lug hub
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range D
- Shop: Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Q&A: Comparing 4.80/4.00-8 Trailer Tires and Speed Rating of 4.80/4.00-8 Trailer Tires
- Q&A: Recommended Larger Wheel/Radial Tire for Boat Trailer with 4.80 x 8 Tires
- Q&A: Can Camper Trailer Weight Capacity Be Increased By Changing Tire Load Range Rating
- Q&A: Replacement Idler Hub Recommendation For Boat Trailer With 07100 Bearings
- Search Results: trailer tires and wheels
- Video: Review of etrailer Trailer Hubs and Drums - Pregreased Idler Hub - AKIHUB-440-2-1K
- Video: All About the Trailer Idler Hub Assembly for 2,000-lb Axles
- Q&A: Recommended Load Range C Boat Trailer Tires in Size 4.80-8
- Q&A: Replacement Hubs and 4.8x8 Tire/Wheel for Older Boat Trailer
Jeff
5/24/2025
My hub bore measures 2.00 inches. I need bearing buddy type bearing protectors because this trailer is a boat trailer. I get tired of changing bearings, races, seals, and grease constantly..